PERAN PEJABAT PEMBUAT KOMITMEN SEBAGAI PENGENDALI FUNGSI DALAM PEMBANGUNAN LANJUTAN LABORATORIUM B2P2TOOT TAWANGMANGU

Umar Hafidz Asy'ari Hasbullah, Hikmahyuliani Hikmahyuliani, Zulfah Maharani, Laela Nur Rokhmah

Abstract


Pembangunan gudang logistik Polres Lamongan, sebagai salah satu elemen infrastruktur publik, perlu dilakukan pengawasan dengan tingkat efisiensi yang tinggi untuk mendukung kebutuhan operasional kepolisian. Beberapa masalah operasional telah muncul yang menghambat penyelesaian tepat waktu. Salah satu masalah utama yang dihadapi adalah keterlambatan dalam pengiriman material yang sangat mempengaruhi kelancaran pekerjaan. Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi keterlambatan dalam proyek pembangunan Gudang Logistik Polres Lamongan, dengan fokus pada peran kontraktor, supplier, konsultan, dan pemilik proyek. Melalui pendekatan kuantitatif, penelitian ini mengidentifikasi faktor-faktor internal dan eksternal yang dapat menyebabkan keterlambatan proyek konstruksi. Metode yang digunakan dalam penelitian ini meliputi analisis regresi linier berganda untuk menentukan hubungan antara variabel independen (lingkungan kerja, keterlambatan material, peralatan, tenaga kerja, dan perubahan desain) dengan keterlambatan pelaksanaan pekerjaan.

Hasil penelitian menunjukkan bahwa faktor tenaga kerja memiliki pengaruh terbesar terhadap keterlambatan proyek, dengan nilai beta 0,455, diikuti oleh perubahan desain yang memiliki pengaruh positif meskipun kecil. Sementara itu, faktor lingkungan kerja, keterlambatan material, dan peralatan tidak menunjukkan pengaruh signifikan. Untuk mengatasi keterlambatan, penelitian ini merekomendasikan perbaikan dalam koordinasi antar pihak terkait, manajemen sumber daya yang lebih baik, dan perencanaan yang lebih matang. Penelitian ini memberikan wawasan yang penting untuk meningkatkan pengelolaan proyek konstruksi dan mencegah keterlambatan yang tidak terduga pada proyek-proyek serupa di masa depan.



Full Text:

PDF

References


Anese, M., Nicoli, M. C., Verardo, G., Munari, M., Mirolo, G., & Bortolomeazzi, R. (2014). Effect of vacuum roasting on acrylamide formation and reduction in coffee beans. Food Chemistry, 145, 168–172. https://doi.org/10.1016/j.foodchem.2013.08.047

Bagdonaite, K., Derler, K., & Murkovic, M. (2008). Determination of acrylamide during roasting of coffee. J. Agric. Food Chem., 56, 6081–6086. https://doi.org/10.1021/jf073051p

Baggenstoss, J., Poisson, L., Kaegi, R., Perren, R., & Escher, F. (2008a). Coffee roasting and aroma formation: application of different time - temperature conditions. Journal of Agriculture and Food Chemistry, 56, 5836–5846. https://doi.org/10.1021/jf800327j

Baggenstoss, J., Poisson, L., Kaegi, R., Perren, R., & Escher, F. (2008b). Roasting and aroma formation: effect of initial moisture content and steam treatment. J. Agric. Food Chem. 2008, 56, 5847–5851. https://doi.org/10.1021/jf8003288

Bicho, N. C., Leitão, A. E., Ramalho, J. C., & Lidon, F. C. (2012). Use of colour parameters for roasted coffee assessment. Ciência e Tecnologia de Alimentos, 32(3), 436–442. https://doi.org/http://dx.doi.org/10.1590/S0101-20612012005000068

Bottazzi, D., Farina, S., Milani, M., & Montorsi, L. (2012). A numerical approach for the analysis of the coffee roasting process. Journal of Food Engineering, 112, 243–252. https://doi.org/10.1016/j.jfoodeng.2012.04.009

Bustos-vanegas, J. D., Corrêa, P. C., Martins, M. A., Baptestini, F. M., Campos, R. C., de Oliveira, G. H. H., & Nunes, E. H. M. (2017). Developing predictive models for determining physical properties of co ff ee beans during the roasting process. Industrial Crops & Products. https://doi.org/10.1016/j.indcrop.2017.12.015

Caporaso, N., Whitworth, M. B., Cui, C., & Fisk, I. D. (2018). Variability of single bean coffee volatile compounds of arabica and robusta roasted coffees analysed by SPME-GC-MS. Food Research International, 108(March), 628–640. https://doi.org/10.1016/j.foodres.2018.03.077

Fabbri, A., Cevoli, C., Alessandrini, L., & Romani, S. (2011). Numerical modeling of heat and mass transfer during coffee roasting process. Journal of Food Engineering, 105, 264–269. https://doi.org/10.1016/j.jfoodeng.2011.02.030

Fadai, N. T., Melrose, J., Please, C. P., Schulman, A., & Gorder, R. A. Van. (2017). A heat and mass transfer study of coffee bean roasting. International Journal of Heat and Mass Transfer, 104, 787–799. https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.083

Gabriel-guzmán, M., Rivera, V. M., Cocotle-ronzón, Y., García-díaz, S., & Hernandez-martinez, E. (2017). Fractality in coffee bean surface for roasting process. Chaos, Solitons and Fractals, 99, 79–84. https://doi.org/10.1016/j.chaos.2017.03.056

Giacalone, D., Kreuzfeldt, T., Yang, N., Liu, C., Fisk, I., & Münchow, M. (2019). Common roasting defects in coffee: Aroma composition, sensory characterization and consumer perception. Food Quality and Preference, 71(March 2018), 463–474. https://doi.org/10.1016/j.foodqual.2018.03.009

Gloess, A. N., Vietri, A., Wieland, F., Smrke, S., Schönbächler, B., Sánchez, J. A., … Yeretzian, C. (2014). Evidence of different flavour formation dynamics by roasting coffee from different origins: On-line analysis with PTR-ToF-MS. International Journal of Mass Spectrometry, 365–366, 324–337. https://doi.org/10.1016/j.ijms.2014.02.010

Hernández, J. A., Heyd, B., & Trystram, G. (2008). Prediction of brightness and surface area kinetics during coffee roasting. Journal of Food Engineering, 89, 156–163. https://doi.org/10.1016/j.jfoodeng.2008.04.026

Hikmahyuliani. (2018). Pengaruh Penambahan Sorbitol Dan Tingkat Penyangraian Kopi Robusta Terhadap Karakteristik Dan Kemampuan Scavenging Radikal DPPH. Universitas PGRI Semarang.

Jokanović, M. R., Džinić, N. R., Cvetković, B. R., Grujić, S., & Odžaković, B. (2012). Changes of physical properties of coffee beans during roasting. APTEFF, 43, 21–31. https://doi.org/10.2298/APT1243021J

Lee, L. W., Cheong, M. W., Curran, P., Yu, B., & Liu, S. Q. (2016). Modulation of coffee aroma via the fermentation of green coffee beans with Rhizopus oligosporus : II . Effects of different roast levels. Food Chemistry. https://doi.org/10.1016/j.foodchem.2016.05.073

Liu, C., Yang, Q., Linforth, R., Fisk, I. D., & Yang, N. (2019). Modifying robusta coffee aroma by green bean chemical pre-treatment. Food Chemistry, 272(July 2018), 251–257. https://doi.org/10.1016/j.foodchem.2018.07.226

Madihah, K. Y. K., Zaibunnisa, A. H., Norashikin, S., Rozita, O., & Misnawi, J. (2012). Optimization of roasting conditions for high-quality robusta coffee. In APCBEE Procedia (Vol. 4, pp. 209–214). Singapore. https://doi.org/10.1016/j.apcbee.2012.11.035

Montavon, P., Mauron, A.-F., & Duruz, E. (2003). Changes in green coffee protein profiles during roasting. J. Agric. Food Chem., 51, 2335–2343. https://doi.org/10.1021/jf020832b

Nunes, F. M., Cruz, A. C. S., & Coimbra, M. A. (2012). Insight into the mechanism of coffee melanoidin formation using modified “in bean†models. Journal of Agricultural and Food Chemistry, 60, 8710–8719. https://doi.org/dx.doi.org/10.1021/jf301527e

Oliveros, N. O., Hernández, J. A., Sierra-Espinosa, F. Z., Guardián-Tapia, R., & Pliego-Solórzano, R. (2017). Experimental study of dynamic porosity and its effects on simulation of the coffee beans roasting. Journal of Food Engineering, 199, 100–112. https://doi.org/10.1016/j.jfoodeng.2016.12.012

Perrone, D., Donangelo, R., Donangelo, C. M., & Farah, A. (2010). Modeling weight loss and chlorogenic acids content in coffee during roasting. J. Agric. Food Chem., 58, 12238–12243. https://doi.org/10.1021/jf102110u

Uman, E., Colonna-dashwood, M., Colonna-dashwood, L., Perger, M., Klatt, C., Leighton, S., … Hendon, C. H. (2016). The effect of bean origin and temperature on grinding roasted coffee. Scientific Reports, 6(24483), 1–8. https://doi.org/10.1038/srep24483

Wang, N., & Lim, L. (2012). Fourier transform infrared and physicochemical analyses of roasted Coffee. J. Agric. Food Chem., 60, 5446–5453. https://doi.org/dx.doi.org/10.1021/jf300348e

Wang, X., & Lim, L. (2016). Investigation of CO2 precursors in roasted coffee. Food Chemistry. https://doi.org/10.1016/j.foodchem.2016.09.095

Wei, F., Furihata, K., Koda, M., Hu, F., Miyakawa, T., & Tanokura, M. (2012). Roasting process of coffee beans as studied by Nuclear Magnetic Resonance: time course of changes in composition. J. Agric. Food Chem., 60, 1005–1012. https://doi.org/dx.doi.org/10.1021/jf205315r

Yang, N., Liu, C., Liu, X., Kreuzfeldt, T., Munchow, M., & Fisk, I. (2016). Determination of volatile marker compounds of common coffee roast defects. Food Chemistry, 211, 206–214. https://doi.org/10.1016/j.foodchem.2016.04.124




DOI: https://doi.org/10.26877/jiphp.v2i2.3218

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jurnal Ilmu Pangan dan Hasil Pertanian

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.