Portable Incinerator Capacity of 5000 Grams with Used Fuel Oil

Eva Hertnacahyani Herraprastanti; Yudis Martin Shindu Saputra; Hendri Suryanto; Muhammad Arif Ashraf

doi:10.26877/asset.v6i1.17108

Portable Incinerator Capacity of 5000 Grams with Used Fuel Oil

Eva Hertnacahyani Herraprastanti, Yudis Martin Shindu Saputra, Hendri Suryanto, Muhammad Arif Ashraf

Abstract

Waste is a significant problem that needs to be urgently addressed. If waste is left untreated and disposed of improperly, it can become contaminated by bacteria, viruses, and other toxins that pose serious risks to humans. In this study, researchers designed and created a portable incinerator that utilizes used oil fuel. The study aimed to determine the highest temperature that can be achieved when incinerating wet and dry waste at weights of 5000 grams, 3000 grams, and 1000 grams. Additionally, performance of portable incinerator was evaluated based on the combustion rate and fuel consumption. The result show that the maximum temperature generated by both dry and wet waste is 450 degrees Celcius. The maximum volume of waste that can be loaded into the combustion chamber is 5000 grams. The results show that the maximum combustion rate of the portable incinerator for dry waste weighing 1000 grams is 196.85 gr/s.The maximum burning rate for wet waste weighing 1000 grams is 165.56 gr/s. The minimum fuel consumption produced from dry waste weighing 1000 grams is 300 ml of used oil. And the maximum fuel consumption is produced from wet waste weighing 5000 grams, namely 1000 ml of used oil.

Keywords

Burner, Furnace, Incinerator

Full Text:

PDF

References

M. Nanda and B. Febriana, “Setahun Corona , Lebih 200 Warga Blora Meninggal,” GATRA Com, 2021.

A. Ikhsan, “Kasus Limbah Medis Covid-19 Dibuang Sembarangan , Polisi : Pihak Hotel Rakus , Pakai Jasa Laundry,” Kompas.com, 2021.

D. Pudjiastuti, Y. Rahmatiar, and D. Guntara, “Pengelolaan Limbah Medis Covid 19 Melalui Kearifan Lokal,” Justisi J. Ilmu Huk., vol. 6, no. 2, pp. 81–101, 2021, doi: 10.36805/jjih.v6i2.1919.

R. Adhani, Pengelolaan Limbah Medis Pelayanan Kesehatan, 1st ed. Banjarmasin: Lambung Mangkurat University Press, 2018.

P. P. E. Sitompul, “Menilik Kebijakan Pengolahan Limbah B3 Fasilitas Pelayanan Kesehatan Selama Pandemi COVID-19 di Provinsi Jawa Barat,” Din. Lingkung. Indones., vol. 8, no. 1, p. 73, 2021, doi: 10.31258/dli.8.1.p.73-79.

E. Laelasari, “Manajemen Pengelolaan Limbah Medis Rumah Tangga Era Pandemi Covid-19 di Indonesia: Narrative Literature,” in Prosiding Seminar Nasional Penelitian dan Pengabdian, 2021, vol. 1, no. 1, pp. 447–458.

M. S. Hastoanggoro, “Desain Kendaraan Pengolah Limbah Medis Covid-19.” Repository Universitas Trisakti, 2021.

A. Lasmana, Junaidi, and E. Kurniawan, “Rancang Bangun Alat Pembakar Sampah ( Incinerator ) Dengan Burner Oli Bekas,” J. Teknol. Rekayasa Tek. Mesin, vol. 2, no. 1, pp. 35–40, 2021.

R. Trihaditia and M. L. Agustiawan, “Efektifitas Rancang Bangun Alat (Burner) Oli Bekas Dalam Mendukung Proses Sterilisasi Media Jamur Tiram (Pleurotus astreatus),” Pro-STek, vol. 1, no. 2, p. 96, 2020, doi: 10.35194/prs.v1i2.828.

Z. Zulfahmi, “Fabrikasi insinerator portabel untuk kebutuhan Puskesmas,” J. Polimesin, vol. 14, no. 2, p. 42, 2017, doi: 10.30811/jpl.v14i2.342.

E. Damanhuri and T. Padmi, “Pengelolaan Sampah,” in Pengelolaan Sampah, vol. 3, no. 2, 2010, p. 7.

I. Abdullah, Y. N. Manik, B. Barita, and J. Jufrizal, “Desain Insinerator Menggunakan Bahan Bakar Cangkang Kelapa Sawit,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 2, no. 1, pp. 34–43, 2019, doi: 10.30596/rmme.v2i1.3067.

J. Junaidi, E. Kurniawan, and A. Lasmana, “Analisis Laju Aliran Udara dan Laju Aliran Massa Bahan Bakar Terhadap Beban Pembakaran Sampah pada Incinerator Berbahan Bakar Limbah Oli Bekas,” J. Engine Energi, Manufaktur, dan Mater., vol. 5, no. 1, p. 17, 2021, doi: 10.30588/jeemm.v5i1.838.

DOI: https://doi.org/10.26877/asset.v6i1.17108

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Advance Sustainable Science, Engineering and Technology (ASSET)

E-ISSN: 2715-4211
Published by Science and Technology Research Centre

Universitas PGRI Semarang, Indonesia

Website: http://journal.upgris.ac.id/index.php/asset/index
Email: asset@upgris.ac.id